Accessories for Fence Panels
Drive-In Post Spikes offer an alternative means of securing your posts into soil should you not wish to excavate 600mm (2) deep holes as required for the setting and concreting in of the wooden posts we supply. These spikes eliminate the need for digging and concreting. Each Drive-In Post Spike has a strong four fin spike that is designed to be driven into firm ground using the Driving Tool (available on this web site). Simply drive the spike into the ground and secure your wooden post using the bolts provided. Designed to enable quick and easy installation of timber fences they are manufactured from 2.5mm thick welded mild steel having been galvanised and powder coated for dual corrosion protection. The twin bolt mechanism provides a secure fit around the wood and allows for easy removal of damaged posts.
View Size and Combination Options
Chevron Convex Trellis Fence Panels
Chevron Weave Convex Trellis Pressure Treated Panels are a decorative alternative to the standard Chevron Weave Convex fencing panels. If youre looking to create something stylish upon your boundary or partially screen an area of your garden (such as a shed or a patio) then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a convex-top full outer frame. This partial trellis variant benefits from the inclusion of a diagonally structured integral convex trellis insert. All formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this convex panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Chevron Wavey Trellis Fence Panels
Chevron Weave Wavey Trellis Pressure Treated Panels are a decorative alternative to the standard Chevron Weave Wavey fencing panels. If youre looking to create something stylish upon your boundary or partially screen an area of your garden (such as a shed or a patio) then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a wavey-top full outer frame. This partial trellis variant benefits from the inclusion of a diagonally structured integral wavey trellis insert. All formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this wavey panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Chevron Weave Fence Panels
Chevron Weave Pressure Treated Panels are one of the UKs most popular continental fencing panels. If youre looking to fence a boundary but want something special and a bit different from a traditional horizontally-clad fence panel; then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan.
View Size and Combination Options
Chevron Weave Convex Fence Panels
Chevron Weave Convex Pressure Treated Panels are a popular continental fencing panel. If youre looking to fence a boundary but want something special with a rounded-top and a bit different from a traditional horizontally-clad fence panel; then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a convex-top full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this convex panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Chevron Weave Trellis Fence Panels
Chevron Weave Trellis Pressure Treated Panels are a decorative alternative to the standard Chevron Weave fencing panels. If youre looking to create something stylish upon your boundary or partially screen an area of your garden (such as a shed or a patio) then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a full outer frame. This partial trellis variant benefits from the inclusion of a diagonally structured integral trellis insert. All formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan.
View Size and Combination Options
Chevron Weave Wavey Fence Panels
Chevron Weave Wavey Pressure Treated Panels are a popular continental fencing panel offered with a wavey-top sometimes called an omega top. If youre looking to fence a boundary but want something decorative with a shaped wavey-top and a bit different from a traditional horizontally-clad fence panel; then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and diagonally spaced boards offset either side of diagonal battens to a V chevron design and all secured within a wavey-top full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this wavey panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Diamond Concave Trellis Fence Panels
Diamond Concave Trellis Pressure Treated Panels also known as scalloped trellis are ideal for decorative partial screening of a patio area or simply where you wish to encourage the growth of climbing plants. These quality continental fence panels are formed from smooth planed diagonal battens which are secured into a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this concave panel refers to the top of the sides (the highest point) thus the panels are lower than 1.80m at the centre of the concave.
View Size and Combination Options
Diamond Convex Trellis Fence Panels
Diamond Convex Trellis Pressure Treated Panels also known as domed trellis are ideal for decorative partial screening of a patio area or simply where you wish to encourage the growth of climbing plants. These quality continental fence panels are formed from smooth planed diagonal battens which are secured into a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this convex panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Diamond Trellis Fence Panels
Diamond Trellis Pressure Treated Panels are ideal for decorative partial screening of a patio area or simply where you wish to encourage the growth of climbing plants. These quality continental fence panels are formed from smooth planed diagonal battens which are secured into a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan.
View Size and Combination Options
Diamond Wavey Trellis Fence Panels
Diamond Wavey Trellis Pressure Treated Panels are ideal for decorative partial screening of a patio area or simply where you wish to encourage the growth of climbing plants. These quality continental fence panels are formed from smooth planed diagonal battens which are secured into a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this wavey panel refers to the top of the wave (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Gates Fence Panels
The Chevron Weave Gate Pack has been designed to compliment any of the standard Chevron Weave panels just to enable that finishing touch to your project where pedestrian access is required. This quality continental gate is formed from smooth planed and spaced diagonal boards offset either side of battens and all secured within a full outer frame. Formed with FSC-Certified timber sourced from managed resources this modern gate has been pressure treated for a longer lifespan. This package also includes two pressure treated planed wooden posts (each allowing up to 600mm into the ground) and two planed wooden post caps.
View Size and Combination Options
Gravel Boards for Fence Panels
Green Pressure Treated Gravel Boards are suitable for all types of green pressure treated or Meadowbrook panel fencing. A 150mm high gravel board should be placed beneath each fence panel at ground level so to avoid the panel itself being in contact with soil or garden waste (leaves etc). By preventing direct ground contact your fence panels will last longer as they will remain free of excess ground moisture which can accelerate rot. Formed from FSC-Certified timber sourced from managed resources these gravel boards have the benefit of being vacuum pressure treated for a longer lifespan. NOTE: No fixings are supplied with this product.
View Size and Combination Options
Hit And Miss Horizontal Fence Panels
Horizontal Hit and Miss Panels are wooden fencing panels formed from two layers of horizontal square-edge boards with the boards to each layer offset-spaced to provide a clean-lined modern hit and miss effect. Each Hit and Miss panel is framed with rectangular battens and complete with a top capping. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works.
View Size and Combination Options
Hit And Miss Vertical Fence Panels
Vertical Hit and Miss Panels are wooden fencing panels formed from two layers of vertical square-edge boards with the boards to each layer offset-spaced to provide a clean-lined modern hit and miss effect. Each Hit and Miss fence panel is formed using horizontal rectangular rails to the rear to which the boarding is face-clad complete with a top capping. Formed with FSC-Certified timber sourced from managed resources these fence panels have been dip-treated at works.
View Size and Combination Options
Horizontal Concave Trellis Fence Panels
Horizontal Weave Concave Trellis Pressure Treated Panels are a decorative alternative to the standard Horizontal Weave fencing panels. If youre looking to create something stylish upon your boundary or partially screen an area of your garden (such as a shed or a patio) then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and spaced horizontal boards offset either side of vertical battens and all secured within a concave-top full outer frame. This partial trellis variant benefits from the inclusion of a diagonally structured full-width integral concave trellis. All formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.60m height of this concave panel refers to the top of the sides (the highest point) thus the panels are lower than 1.60m at the base (centre) of the concave.
View Size and Combination Options
Horizontal Convex Trellis Fence Panels
Horizontal Weave Convex Trellis Pressure Treated Panels are a decorative alternative to the standard Horizontal Weave fencing panels. If youre looking to create something stylish upon your boundary or partially screen an area of your garden (such as a shed or a patio) then these modern fence panels are ideal. These quality continental fence panels are formed from smooth planed and spaced horizontal boards offset either side of vertical battens and all secured within a convex-top full outer frame. This partial trellis variant benefits from the inclusion of a diagonally structured full-width integral convex trellis. All formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan. It should be noted that the 1.80m height of this convex panel refers to the top of the dome (the highest point) thus the panels are lower than 1.80m at the sides.
View Size and Combination Options
Horizontal Weave Fence Panels
Horizontal Weave Pressure Treated Panels are the UKs most popular type of continental fencing panel. If youre looking to fence a boundary but want something special with a modern quality finish then these fence panels are ideal. These quality continental fence panels are formed from smooth planed and spaced horizontal boards offset either side of vertical battens and all secured within a full outer frame. Formed with FSC-Certified timber sourced from managed resources these modern fencing panels have been pressure treated for a longer lifespan.
View Size and Combination Options
Palisade Round Top Fence Panels
Round Top Palisade Panels are pre-assembled wooden fencing panels formed from vertical square-edge pales each complete with round (curved) tops set to an open-slatted design and fixed to horizontal supporting rails. The partially open design means that these panels can be used for decorative purposes; ideal for front gardens for example. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works.
View Size and Combination Options
Palisade Square Top Fence Panels
Square Top Palisade Panels are pre-assembled wooden fencing panels formed from vertical square-edge pales each complete with square (flat) tops set to an open-slatted design and fixed to horizontal supporting rails. The partially open design means that these panels can be used for decorative purposes; ideal for front gardens for example. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works.
View Size and Combination Options
Planed Posts for Fence Panels
Pressure Treated Planed Wooden Posts are suitable for all types of panel fencing but these green-tinted pressure treated posts are ideal for supporting our Meadowbrook range of planed pressure treated panels. Formed from FSC-Certified timber sourced from managed resources these posts have the benefit of being vacuum pressure treated for a longer lifespan. Always remember to allow 600mm of post length into the ground thus you should order your post lengths 2 (600mm) longer than your panel height i.e; 8 posts for a 6 fence 7 posts for a 5 fence etc. Each post includes a sawn wooden post cap.
View Size and Combination Options
Sawn Posts for Fence Panels
Pressure Treated Sawn Wooden Posts are suitable for all types of panel fencing but these green-tinted pressure treated posts are ideal for supporting our Fencestore Hit & Miss or Closeboard sawn pressure treated panels. Formed from FSC-Certified timber sourced from managed resources these posts have the benefit of being vacuum pressure treated for a longer lifespan. Always remember to allow 600mm of post length into the ground thus you should order your post lengths 2 (600mm) longer than your panel height i.e; 8 posts for a 6 fence 7 posts for a 5 fence etc. Each post includes a sawn wooden post cap.
View Size and Combination Options
Vertical Closeboard Fence Panels
Vertical Closeboard Panels are wooden fencing panels formed from vertical feather-edge pales each partially overlapped and fixed to several rear horizontal supporting wooden rails. Closeboard panels are traditionally used for boundary screening and are more robust than common Waney-edge panels for example. Each Vertical Closeboard Panel is supplied complete with a top capping. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works.
View Size and Combination Options
Vertical Domed Closeboard Fence Panels
Vertical Domed Closeboard Panels are wooden fencing panels with a curved domed-top formed from vertical feather-edge pales each partially overlapped and fixed to several rear horizontal supporting wooden rails. Closeboard panels are traditionally used for boundary screening and are more robust than common Waney-edge panels for example. Each Vertical Domed Closeboard Panel is supplied complete with a top capping. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works. The panel height stated for this product relates to the top of the dome; thus the maximum height.
View Size and Combination Options
Waney Edge Fence Panels
Waney Edge Panels also known as Overlap Panels are the UKs most popular fencing panels. Ideal for garden boundaries these fence panels offer an economic screening solution. Formed from Waney Edge boards that are partially horizontally overlapped these traditional fence panels offer a semi-rustic appearance that will suit most gardens. Each Waney Edge panel is framed with rectangular battens and complete with a top capping. Formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works.
View Size and Combination Options
Waney Edge Trellis Fence Panels
Waney Edge Trellis Panels also known as Overlap Trellis Panels are based upon the UKs most popular fencing panel; the Waney Edge. Ideal for garden boundaries these fence panels offer an economic screening solution. The 5 high base panel is formed from Waney Edge boards that are partially horizontally overlapped offering a semi-rustic appearance that will suit most gardens. Each Waney Edge panel is framed with rectangular battens and complete with a top capping. The 1 (300mm) high independent Trellis section is designed to be positioned above the main panel for a decorative effect. The combined panel height of the Waney Edge and Trellis is 6. All formed with FSC-Certified timber sourced from managed resources these panels have been dip-treated at works. This extensive package also includes pressure treated sawn wooden posts (each allowing up to 600mm into the ground) sawn wooden post caps and metal fixing clips.
